当前位置:首页  >  新闻资讯  >  德国BURKERT柱塞阀2/2直接作用-2610型优价销售

德国BURKERT柱塞阀2/2直接作用-2610型优价销售
更新时间:2018-04-27      阅读:1217

德国BURKERT柱塞阀2/2直接作用-2610型优价销售
德国BURKERT柱塞阀2/2直接作用 2610阀是一种直接作用的介质分离柱塞阀。通过不锈钢波纹管对线圈和外壳进行热密封隔离,可实现介质温度和侵蚀性介质。线圈由耐化学腐蚀的环氧树脂模制而成。因此,该阀特别适用于关键介质的应用。包含在供货范围内的'Kick and Drop'电缆的电缆插头支持阀门打开过程,并在打开后将电流降低到保持力。结合符合DIN EN 17301-803 A型规格的插头,该阀门符合IP65防护等级 - 与不锈钢外壳NEMA 4X结合使用。
产品的描述可能与实际的具体设计不同。
产品照片Typ 2610
直动式介质分离阀,直径DN12
焊接金属波纹管系统(316Ti)
高品质的PTFE阀座密封
介质温度从-200°C到+180°C
节能“踢和放”电子产品
如需选择正确的产品,请根据数据表参考技术数据,图像和注意事项以便正确使用。
德国BURKERT柱塞阀2/2直接作用-2610型优价销售

Type 2610 - Plunger valve 2/2 way direct-acting

facebookgoogle plustwitter

Produkt-Foto Typ 2610

The depiction of the products may differ from the actual specific design.

  • Produkt-Foto Typ 2610

Type Description

The 2610 valve is a direct-acting, media-separated plunger valve. Thermal and hermetic isolation of coil and housing by means of a stainless steel bellows enables both extreme media temperatures and aggressive media. The coils are moulded with chemically resistant epoxy. Therefore, the valve is especially well suited for applications with critical media. The cable plug with 'Kick and Drop' electronics included in the scope of supply supports the valve opening process and reduces current to the holding power after opening. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65 – in combination with the stainless steel housing NEMA 4X.

  • Direct-acting, media-separated valve with diameter of up to DN 12
  • Welded metal bellows system (316Ti)
  • High-quality PTFE seat seal
  • Media temperature from -200 °C to +180 °C
  • Energy-saving 'Kick and Drop' electronics

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.


德国BURKERT柱塞阀2/2直接作用-2610型优价销售

电话 询价

产品目录