代理ATOS特殊阀防爆阀
意大利ATOS阿托斯特殊阀防爆阀
防爆阀，开关或比例，用于潜在爆炸性环境中存在气体或易燃粉尘。螺线管具有原始设计，整体和与阀门*。
在选择类型测试和认证以下标准：
多重化ATEX，IECEx，EAC
*组气体 - 采矿
第II组气体和粉尘
美国和加拿大标准
UL429，UI1203和CSA 22.2
印度政府的PESO认证
MA中国矿业认证
不锈钢阀门
新的“X”定向和压力控制线，用于腐蚀性环境和特殊液体的不锈钢执行。坚固的不可氧化设计，适用于矿物油，水甘醇，特殊合成液或纯水。
按要求，认证如上
安全阀
安全阀专门设计用于确保安全，它们配备有用于监控阀芯位置和相关液压状态的特定装置用于在紧急情况或安全情况下切断执行器的液压动力线
本质安全阀
“本质安全”规范基于在具有危险环境的环境中限制电路的能量的原理。为了限制zui大输入电流，阀门必须通过特定的“安全栅”供电。
压力至210巴
流量至20 l / min（先导阀）
无泄漏阀和滤芯
无泄漏电磁阀，副板或螺纹，双向，提升型：通常用于切断液压电源线。目前在“常闭”配置中，当它们的螺线管通电时，它们打开流动。
代理ATOS特殊阀防爆阀

Explosion-proof valves, on-off or proportional, for use in potential explosive environments for presence of gas or flammable dust. Solenoids are of original design, integral and consistent to the valves.

At choice type-tested and certified to following standards:

• Multicertification ATEX, IECEx, EAC
  Group I Gas - Mining
  Group II Gas and dust
• US & Canadian standards
  UL429, UI1203 and CSA 22.2
• PESO Certification by Government of India
• MA Chinese Mining Certification

Stainless steel valves

A new "X" line of directional and pressure controls, in stainless steel execution for corrosive environments and special fluids. Rugged inoxidizable design, suitable for use with mineral oils, water glycol, special syntetic fluids or just pure water.

• on request, certifications as above

Safety valves

Safety valves are specifically designed to ensure safety, they are equipped with specific devices for monitoring spool position and the relevant hydraulic status Used to cut off, in case of emergency or safety situation, the line of hydraulic power to an actuator

Intrinsically safe valves

"Intrinsically safe" specification is based on the principle of limiting the energy of electric circuits in environments with hazardous atmospheres. To limit the max input current, valves must be powered through specific "safety barriers".

• pressure to 210 bar
• flow to 20 l/min (pilot valve)

Leak-free valves & cartridges

Leak free solenoid valves, subplate or screw-in, two-way, poppet style: normally used to cut off the hydraulic power supply line. Currently available in "normally closed" configuration, they open the flow when their solenoid is energized.